Back to Top
PLANET IGS-10020MT network switch Managed L2+ Gigabit Ethernet (10/100/1000) Black
Out of stock
SKU
IGS-10020MT
£358.20
£298.50
Industrial 8-port 10/100/1000T + 2-port 1G/2.5G SFP Managed Gigabit Switch
- Physical Port
- 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
- 2 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection
- Industrial Case and Installation
- IP30 aluminum case protection
- DIN-rail or wall-mount design
- Redundant power design
- 12 to 48V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable
- Supports 6000 VDC Ethernet ESD protection
- 40 to 75 degrees C operating temperature
- Industrial Protocol
- Modbus TCP for real-time monitoring in SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol)
- Layer 2 Features
- High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Storm Control support
- Broadcast, Multicast and Unknown Unicast
- Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
- Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- BPDU Guard
- Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 5 trunk groups, up to 10 ports per trunk group
- Up to 26Gbps bandwidth (duplex mode)
- Provides port mirror (many-to-1)
- Port mirroring to monitor the incoming or outgoing traffic on a particular port
- Loop protection to avoid broadcast loops
- Supports ERPS (Ethernet Ring Protection Switching)
- Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
- Link Layer Discovery Protocol (LLDP)
- Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
- Quality of Service
- Ingress Shaper and Egress Rate Limit per port bandwidth control
- 8 priority queues on all switch ports
- Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Supports QoS and In/Out bandwidth control on each port
- Traffic-policing on the switch port
- DSCP remarking
- Multicast
- Supports IPv4 IGMP Snooping v1, v2 and v3
- Supports IPv6 MLD Snooping v1 and v2
- Querier mode support
- IPv4 IGMP Snooping port filtering
- IPv6 MLD Snooping port filtering
- MVR (Multicast VLAN Registration)
You may also be interested in
| Product |
TP-Link TL-SG1048 network switch Unman...
£292.06
£243.38
|
D-Link 48-Port Gigabit Smart Managed S...
£352.21
£293.51
|
D-Link 24-Port Gigabit PoE Smart Manag...
£352.86
£294.05
|
D-Link 20-Port Gigabit Stackable Smart...
£356.10
£296.75
|
D-Link 52-Port PoE Gigabit Smart Manag...
£423.37
£352.81
|
|---|---|---|---|---|---|
| SKU |
TL-SG1048
|
DGS-1210-48
|
DGS-1210-24P
|
DGS-1510-20
|
DGS-1210-52MP
|
| Manufacturer |
TP-LINK
|
D-Link
|
D-Link
|
D-Link
|
D-Link
|
| Rack mounting |
Y
|
Y
|
Y
|
Y
|
Y
|
| Power over Ethernet (PoE) |
N/A
|
N
|
Y
|
N
|
N
|
| Stackable |
N/A
|
Y
|
N/A
|
Y
|
Y
|
| Switch type |
Unmanaged
|
Managed
|
Managed
|
Managed
|
Managed
|
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
| Basic switching RJ-45 Ethernet ports quantity |
46 to 48
|
46 to 48
|
22 to 24
|
15 to 16
|
46 to 48
|
