HPE Aruba Networking AP-735 (RW) Tri Radio 2x2 Wi-Fi 7 Internal Antennas Campus Access Point

In stock

SKU

S1G42A

Add to Compare

£959.57 £799.64

Aruba Networking AP-735 (RW) Tri Radio 2x2 Wi-Fi 7 Internal Antennas Campus Access Point

Wi‐Fi 7 (802.11be) brings multi‐link operation (MLO) for channel aggregation and 4K QAM for higher throughput and lower latency
Unlocks the 6 GHz band to more than double the available capacity
Comprehensive tri‐band coverage across 2.4 GHz, 5 GHz, and 6 GHz to deliver 9.3 Gbps maximum tri‐band aggregate data rate
Capable of up to 14.4 Gbps maximum aggregate data rate using optional dual 5 GHz and 6 GHz radio modes1
Up to three 320 MHz channels in 6 GHz support low‐latency, bandwidth‐hungry applications like high‐definition video and augmented reality/virtual reality applications
Patented Ultra Tri‐Band (UTB) filtering enables 5 GHz and 6 GHz to operate without restrictions or interference

More Information
5 GHz	Yes
2.4 GHz	Yes
6 GHz	Yes
SKU	S1G42A
EAN	0190017663791
Manufacturer	HPE
Availability	In Stock
Product Family	Aruba Networking

High Performance Wi-Fi 7

The HPE Aruba Networking 730 Series Campus Access Points are based on the IEEE 802.11be standard and designed to take advantage of the 6 GHz band through three dedicated radios, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference.
This access point series delivers up to 9.3 Gbps maximum tri-band aggregate data rate by using three 2x2 MIMO radios (2.4 GHz, 5 GHz, and 6 GHz), and achieve capability of up to 14.4 Gbps maximum aggregate data rate using optional dual 5 GHz and 6 GHz radio modes.
Patented Ultra Tri-band filtering enables enterprises to take advantage of the high end of 5 GHz with the lower end of 6 GHz without creating coverage gaps or islands.
Enhanced wireless experience with HPE Aruba Networking ClientMatch technology that removes sticky client issues by steering a client to the AP where it receives the best radio signal.
High availability with two HPE Smart Rate Ethernet ports for hitless failover for both data and power. Configurable to 1, 2.5, or 5 Gbps (or 100 Mbps), these dual ports provide business continuity for mission-critical applications.

Simplified Access with Enhanced Security

The HPE Aruba Networking 730 Series Campus Access Points offer enhanced security with Dynamic Segmentation to remove the time-consuming and error-prone task of managing complex and static VLANs, ACLs, and subnets by dynamically assigning policies and keeping traffic secure and separated.
MACsec-capable 5 GbE port extends wired Ethernet protection to the access point.
This access point series offers stronger encryption and authentication with WPA3, secure credentials/keys storage for guest access with Enhanced Open, and user and IoT access policy enforcement firewalls (PEF).
The access points simplify policy enforcement using the HPE Aruba Networking Policy Enforcement Firewall (PEF) to encapsulate traffic from the access point to the gateway (or mobility controller) for end-to-end encryption and inspection.
For enhanced device assurance, HPE Aruba Networking 730 Series Campus Access Points include an installed TPM for secure storage of credentials, keys, and boot code.

AP as an IoT platform

The HPE Aruba Networking 730 Series Campus Access Points can serve as flexible IoT platforms that bolster network security and provide coverage for a broad range of IoT devices, without the need for network overlays.
This access point series provides two built-in Bluetooth 5.4 and 802.15.4 radios for Zigbee support to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors. Two USB port extensions provide connectivity to a range of IoT devices.
Advanced IoT Coexistence (AIC) feature uses built-in filtering to allow Wi-Fi and Bluetooth Low Energy (BLE)/Zigbee radios to operate at maximum capacity without the impact of interference.
HPE Aruba Networking Central IoT Operations unifies visibility of IT and OT infrastructure within the network health dashboard by extending network monitoring and insights to BLE, Zigbee, and other non-IP IoT devices to help non-Wi-Fi device onboarding and data collection.
HPE Aruba Networking Central Client Insights uses deep packet inspection to provide additional context and behavioral information that helps verify devices are receiving proper policy enforcement and continuously monitors for rogue devices.

Energy Saving and Self-locating Access Points

The HPE Aruba Networking 730 Series Campus Access Points help organizations reduce energy consumption and deliver precision indoor location services with the Access Points that serve as reference points for client devices and other technologies using fine time measurement.
This access point series offers precision locationing with support of FTM 802.11az for sub-1 meter accuracy and built-in GNSS receiver for high accuracy indoor location measurements.
Built-in barometric sensor for altitude locationing within multi-story buildings provides floor-level mappings.
AI-powered dynamic power save mode enables the HPE Aruba Networking 730 Series Campus Access Points to automatically wake up at a schedule when connectivity demand arises, reducing power demands and lowering the energy footprint to align with the organization’s sustainability initiatives.
The target wake time (TWT) establishes a schedule for clients to communicate with an Access Point to help improve client power savings and reduce airtime contention. Intelligent Power Monitoring provides energy consumption insights as APs continuously monitor and report hardware energy usage.

The HPE Aruba Networking 730 Series Campus Access Points go beyond the Wi-Fi 7 standard to improve wireless performance, strengthen network security, deliver precise location-based services, and act as a secure IoT platform, enabling enterprises to increase the value of their wireless investment and unlock operational efficiencies. The 730 Series includes unique Ultra Tri-band (UTB) filtering and dual 5 Gbps Ethernet ports to remove coverage gaps, provide greater resiliency, and deliver fast connectivity with enhanced security. HPE Aruba Networking Central provides intelligent automation, AI insights, and unified infrastructure management to help drive efficient IT operations. The 730 Series include a limited lifetime warranty.

What is new supporting point:
Wi-Fi 7 access points ideal for enterprises, healthcare, LPV, education, retail, and industrial IoT deployments.
Comprehensive tri‑band coverage across 2.4 GHz, 5 GHz, and 6 GHz delivers up to 9.3 Gbps maximum aggregate data rate.
Patented Ultra Tri-band (UTB) filtering improves the use of 5 GHz and 6 GHz bands.
High density IoT support with two integrated Bluetooth 5.4 and 802.15.4 radios for Zigbee support and two USB port extensions.
Built-in GNSS receiver, barometric pressure sensor, and intelligent software enable Access Points to self locate and act as reference points for accurate indoor location measurements.
High availability with dual 5 Gbps ports for redundant Ethernet and power.

Data transmission
Ethernet LAN data rates	10,100,1000,2500,5000 Mbit/s
Performance
2.4 GHz	Yes
5 GHz	Yes
Reset button	Yes
Networking standards	IEEE 802.11be
Ethernet LAN data rates	10,100,1000,2500,5000 Mbit/s
Certification	None
MIMO type	Multi User MIMO
MIMO	Yes
Network
Networking standards	IEEE 802.11be
Security
Cable lock slot	Yes
Features
6 GHz	Yes
2.4 GHz	Yes
5 GHz	Yes
Networking standards	IEEE 802.11be
Ethernet LAN data rates	10,100,1000,2500,5000 Mbit/s
Bluetooth	Yes
Bluetooth version	5.4
MIMO type	Multi User MIMO
MIMO	Yes
Maximum data transfer rate (2.4 GHz)	688 Mbit/s
Maximum data transfer rate (5 GHz)	2900 Mbit/s
Maximum data transfer rate (6 GHz)	5800 Mbit/s
Bluetooth Low Energy (BLE)	Yes
Trusted Platform Module (TPM)	Yes
BeamForming	Yes
Ports & interfaces
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	2
DC-in jack	Yes
Power
Power consumption (max)	36 W
Power over Ethernet (PoE)	Yes

Design
Placement	Pole, Wall
Product colour	White
Reset button	Yes
Certification	None
Cable lock slot	Yes
Cable lock slot type	Kensington
Antenna
Antenna type	Internal
Antenna direction type	Omni-directional
Technical details
Reset button	Yes
Compliance certificates	Low Voltage Directive (LVD)
Certificates
Certification	None
Compliance certificates	Low Voltage Directive (LVD)
Weight & dimensions
Width	240 mm
Depth	240 mm
Weight	1.44 kg
Height	56 mm
Packaging content
Quantity per pack	1 pc(s)
Operational conditions
Operating relative humidity (H-H)	5 - 95%
Operating temperature (T-T)	0 - 50 °C
Storage temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 95%
Logistics data
Quantity per pack	1 pc(s)

You may also be interested in

Compare Products
Product	New HPE Aruba Networking AP-735 (RW) Tri R... £959.57 £799.64	Popular Ubiquiti UAP-AC-M-PRO 1300 Mbit/s Whit... £860.18 £716.82	Recommended Ubiquiti UniFi nanoHD 1733 Mbit/s Whit... £784.84 £654.03	Hot Product Cisco Catalyst 9115AXE-E Wireless Acce... £834.61 £695.51	Bestseller Cisco Catalyst 9120AXE-E Wireless Acce... £1,306.94 £1,089.12	Cisco Meraki MR56-HW wireless access p... £1,356.24 £1,130.20
SKU	S1G42A	UAP-AC-M-PRO-5	UAP-NANOHD-5	C9115AXE-E	C9120AXE-E	MR56-HW
Manufacturer	HPE	Ubiquiti	Ubiquiti	Cisco	Cisco	Cisco
Maximum data transfer rate	N/A	1300 Mbit/s	1733 Mbit/s	N/A	N/A	N/A
2.4 GHz	Y	Y	Y	Y	Y	Y
5 GHz	Y	Y	Y	Y	Y	Y