Liberty AV Solutions DL-HDE100 AV extender AV transmitter & receiver Black
£276.89
£230.74
DL-HDE100, HDMI, RJ-45, TRS, TS, HDCP 2.2, PCM, 135x74x15 mm
- Complete set includes TX, RX, mounting tabs, IR flasher/sensor, & power supply
- Extend HDMI signals up to 4K up to 100m (4K 70m / 1080P 100m)
- Extends bi-directional IR, RS232 and ethernet pass through. Flexible PoC (Power on either end)
- Built-in surge protection
- Diagnostic LEDs
- HDCP 2.2 compliant
- Bidirectional Wideband IR and RS232 pass-through
- 100-BaseT Ethernet pass-through
- Flexible power design (use power supply at TX or RX)
- Locking power connector (power supply included)
The DigitaLinx DL-HDE100 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, Ethernet, bidirectional IR, and RS232 up to 100 meters away using a single twisted pair cable.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
The DL-HDE100 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
The DL-HDE100 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
Features | |
---|---|
Material | Steel |
HDCP | Yes |
Electrostatic Discharge (ESD) protection | 15 kV |
Consumer Electronics Control (CEC) support | Yes |
Carrier frequency | 55 kHz |
Signal-to-Noise Ratio (SNR) | 70 dB |
Certification | CE |
Type | AV transmitter & receiver |
Cable types supported | Cat5e, Cat6 |
Maximum transfer distance | 100 m |
LED indicators | Link, Power, Status |
Bandwidth | 10.2 Gbit/s |
Product colour | Black |
Electrostatic Discharge (ESD) protection | Yes |
HDCP version | 2.2 |
Technical details | |
Material | Steel |
HDCP | Yes |
Electrostatic Discharge (ESD) protection | 15 kV |
Consumer Electronics Control (CEC) support | Yes |
Carrier frequency | 55 kHz |
Signal-to-Noise Ratio (SNR) | 70 dB |
Certification | CE |
Type | AV transmitter & receiver |
Cable types supported | Cat5e, Cat6 |
Maximum transfer distance | 100 m |
Bandwidth | 10.2 Gbit/s |
Product colour | Black |
Connectivity technology | Wired |
Compliance certificates | RoHS |
Ports & interfaces | |
Remote (IR) output | 2 |
Remote (IR) input | 2 |
RJ-45 input ports | 1 |
RJ-45 output ports | 1 |
HDMI in | 1 |
Number of HDMI outputs | 1 |
DC-in jack | Yes |
Connectivity technology | Wired |
Power | |
Power consumption (transmitter) (max) | 3 W |
Operating voltage | 18 V |
Indication | |
---|---|
LED indicators | Link, Power, Status |
Operational conditions | |
Storage relative humidity (H-H) | 20 - 90% |
Operating relative humidity (H-H) | 20 - 90% |
Storage temperature (T-T) | -10 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Weight & dimensions | |
Width | 135 mm |
Height | 15 mm |
Depth | 74 mm |
Weight | 820 g |
Packaging content | |
IR receiver included | Yes |
IR blaster included | Yes |
Mounting brackets included | Yes |
Cables included | AC |
AC adapter included | Yes |
Manual | Yes |