Origin Storage QSFP-4X10G-C5M Alcatel Lucent Compatible Direct Attach Copper Breakout Cable 40GBase-CU QSFP+ to 4x10GBase-CU SFP+ (Passive Twinax 5m)

SFP-H10GB-CU5M=

CAB-SPWR-30CM=

AXC763-10000S

DEM-CB100S

MA-CBL-TA-3M

The Cisco 10G Direct Attach Twinax SFP+ Cable is an efficient and cost-effective solution for connectivity within racks and across adjacent racks. This passive twinax copper cable assembly features SFP+ connectors on each end, offering a variety of 10-Gigabit Ethernet connectivity options for data centres, enterprise server rooms and service provider transport applications.

The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack.

StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.

A StackPower cable has colors bands on the cable ends, green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.

An XPS cable has a color band on the cable ends as well, red on one end and yellow on the other end. This cable can only be used to connect Catalyst 3750-X or 3560-X switch to an XPS. Note that the connector with the red band can only connect to an XPS while the connector with the green and blue band can connect to Catalyst 3750-X or 3560-X switch.

The Cisco Catalyst 3750-X Series Switches come with four power supply options and any of them can be used on any switch in a stack and in any combination.

- Direct Attach SFP+ copper cable (10GSFP+Cu)
- SFP+ connector on both sides
- Drives 10 Gigabit Ethernet (3 m distance)
- 5-year Warranty

These 10G Passive SFP+ Twinaxial Direct Attach Cables are designed to support connections for 10 Gbps Gigabit Ethernet or Gigabit Ethernet switches with 10 Gbps Gigabit Ethernet uplink, much more faster than SFP which only supports 2.5 Gbps Gigabit Ethernet. With two cable models including the DEM-CB100S and DEM-CB300S, these cables are suitable for short distances up to 3 metres, and is ideal for highly cost-effective networking connectivity between switches and servers within a rack or in adjacent racks. These 10G Passive SFP+ Twinaxial Direct Attach Cables are certified to be compatible with D-Link products to provide you best performance and reliability.

Ideal for High-Bandwidth Operations
These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables support speeds of up to 10 Gbps, while having lower latency and power consumption than other cables types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. This makes it an optimal solution for handling high bandwidth transmission within short distances such as inside energy-efficient data centres.

Enhanced Small Form-factor Pluggable Format
These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables use Enhanced Small Form- factor Pluggable format (SFP+) connectors. The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, resulting in lower costs, lower power disruption, and higher port density. Meanwhile SFP+ connectors use the same space-per-port as standard SFP connectors but support higher data transmission speeds.

Save on Costs
These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables feature SFP+ connectors on
both ends, thus eliminating the need for expensive SFP+ transceivers. This makes it more
cost-effective than fibre cables which must use SFP+ transceivers.

Passive Twinax

10G Direct Attach Twinax SFP+ Cable, Passive, 30AWG Cable Assembly, 5 M, Grey, 5-Year Standard Warranty (SFP-H10GB-CU5M=)

30cm StackPower cable, Spare

Direct Attach SFP+ copper cable, 3m, 10 Gigabit SFP+

100 cm 10GbE Direct Attach SFP+ Cable DEM-CB100S

Meraki 10GSFP+Cu 3m

Cisco

Cisco

Netgear

D-Link

Cisco