Wi-Tek WI-PMS310GF-UPS+V2 network switch Managed L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black, Orange
£96.07
£80.06
V2, 8 10/100/1000Mbps RJ45 Ports, 2 1000Mbps SFP Slots, 1 Console Port, AC 110~240V 50/60HZ, 150W, 411 × 275 × 90 mm
- 8 10/100/1000Mbps RJ45 Ports
- 2 1000Mbps SFP Slots and 1 Console Port
- Layer 2 Managed PoE Switch
- Internal power adapter supply 150W for 24V/48V PDs
- Inside solar controller and battery controlle
- Up to 4k QVLANs simultaneously
- Restart AP via PoE managed page remotely
- Link Aggregation Control Protocol (LACP)
- Web and cli, enjoy more configuration options
| SKU | WI-PMS310GF-UPS+ V2 |
|---|---|
| EAN | 5420016867971 |
| Manufacturer | Wi-Tek |
| Availability | In Stock |
| PDF URLs |
View PDF |
Wi-Tek UPS No-Break Solar PoE Switch Serial is designed for CCTV surveillance and wireless network,
including unmanaged and layer 2 managed solar PoE switches. Based on its green energy, it can be charged by the inexhaustible and natural source of energy -- solar power. It can conserve green energy economically and power the remote IP cameras and wireless AP, especially used for expansive applications such as dams, forests, deserts, national parks, and highways.
Built-in MPPT (Maximum Power Point Tracking) Charge Controller)
An MPPT(Maximum Power Point Tracker) is an electronic DC to DC converter that optimizes the match between the PV solar panels and the battery bank or utility grid. They convert a higher voltage DC output from solar panels to the lower voltage needed to charge the battery effectively.
Zero-Carbon and Stable Power Supply
The 24V/24 batteries get recharged by the solar power and then keep powering PoE Powered Devices without the need for any power. Its zero-carbon feature is made possible as the energy the unit gets is renewable. More importantly, the operation of outdoor wireless IP-based surveillance can be continued into the night as the battery is charged during the day.
Battery Working Status Monitoring and LED Indicator
The administrator can monitor the current status of PoE power usage easily and efficiently via its LED indication. The panel of the switches has LED indicators of different battery levels.
User-friendly and Secure Management (For L2 Managed solar PoE Switch)
The administrator can remotely access the WI-PMS310GF-UPS+ to know the power status of the battery and renewable energy. The WI-PMS310GF-UPS+ features the following special power management functions: Current battery usage status by percentage; Low voltage cut-off protection.
Layer 2 Managed Powerful Functions (For L2 Managed solar PoE Switch)
Many Layer 2 functions can help you manage your Powered Devices easily, such as low voltage cut-off protection, intelligent powered device alive check, schedule power recycling, and PoE schedule for energy savings.
including unmanaged and layer 2 managed solar PoE switches. Based on its green energy, it can be charged by the inexhaustible and natural source of energy -- solar power. It can conserve green energy economically and power the remote IP cameras and wireless AP, especially used for expansive applications such as dams, forests, deserts, national parks, and highways.
Built-in MPPT (Maximum Power Point Tracking) Charge Controller)
An MPPT(Maximum Power Point Tracker) is an electronic DC to DC converter that optimizes the match between the PV solar panels and the battery bank or utility grid. They convert a higher voltage DC output from solar panels to the lower voltage needed to charge the battery effectively.
Zero-Carbon and Stable Power Supply
The 24V/24 batteries get recharged by the solar power and then keep powering PoE Powered Devices without the need for any power. Its zero-carbon feature is made possible as the energy the unit gets is renewable. More importantly, the operation of outdoor wireless IP-based surveillance can be continued into the night as the battery is charged during the day.
Battery Working Status Monitoring and LED Indicator
The administrator can monitor the current status of PoE power usage easily and efficiently via its LED indication. The panel of the switches has LED indicators of different battery levels.
User-friendly and Secure Management (For L2 Managed solar PoE Switch)
The administrator can remotely access the WI-PMS310GF-UPS+ to know the power status of the battery and renewable energy. The WI-PMS310GF-UPS+ features the following special power management functions: Current battery usage status by percentage; Low voltage cut-off protection.
Layer 2 Managed Powerful Functions (For L2 Managed solar PoE Switch)
Many Layer 2 functions can help you manage your Powered Devices easily, such as low voltage cut-off protection, intelligent powered device alive check, schedule power recycling, and PoE schedule for energy savings.
| Management features | |
|---|---|
| Switch type | Managed |
| Web-based management | Yes |
| System event log | Yes |
| Quality of Service (QoS) support | Yes |
| Multicast support | Yes |
| Switch layer | L2 |
| Configuring Location Settings (CLI) | Yes |
| Ports & interfaces | |
| SFP module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Installed SFP modules quantity | 0 |
| Installed SFP+ modules quantity | 0 |
| Console port | RJ-45 |
| Network | |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| VLAN support | Yes |
| Spanning tree protocol | Yes |
| Port mirroring | Yes |
| Number of VLANs | 4000 |
| Link aggregation | Yes |
| Broadcast storm control | Yes |
| 10G support | No |
| Virtual LAN features | IP subnet–based VLAN, MAC address-based VLAN, Protocol-based VLAN, Tagged VLAN, Voice VLAN |
| IGMP snooping | Yes |
| Data transmission | |
| Jumbo frames | 10240 |
| Packet buffer memory | 1.5 MB |
| MAC address table | 8000 entries |
| Store-and-forward | Yes |
| Jumbo frames support | Yes |
| Forwarding rate | 14.88 Mpps |
| Number of VLANs | 4000 |
| Security | |
| IP-MAC-Port binding | Yes |
| Authentication | Port-based authentication |
| Security algorithms | SNMP, SNMPv2, SNMPv3 |
| IGMP snooping | Yes |
| Access Control List (ACL) | Yes |
| DHCP features | DHCP client, DHCP snooping |
| Multicast features | |
| Multicast support | Yes |
| Design | |
| Product colour | Black, Orange |
| Number of fans | 2 fan(s) |
| Certification | CE, FCC, RoHS |
| Performance | |
| Firmware upgradeable | Yes |
| Fanless | Yes |
| Packet buffer memory | 1.5 MB |
| Power | |
|---|---|
| Power consumption (max) | 150 W |
| AC input voltage | 110 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power source | AC |
| Power over Ethernet (PoE) | |
| Total Power over Ethernet (PoE) budget | 150 W |
| Power over Ethernet (PoE) ports quantity | 8 |
| Power over Ethernet (PoE) | Yes |
| Operational conditions | |
| Storage temperature (T-T) | -30 - 70 °C |
| Storage relative humidity (H-H) | 5 - 90% |
| Operating temperature (T-T) | -20 - 60 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Virtual LAN features | |
| VLAN support | Yes |
| Number of VLANs | 4000 |
| Virtual LAN features | IP subnet–based VLAN, MAC address-based VLAN, Protocol-based VLAN, Tagged VLAN, Voice VLAN |
| Weight & dimensions | |
| Width | 330 mm |
| Depth | 215 mm |
| Height | 45 mm |
| Weight | 2.3 kg |
| Packaging data | |
| Package width | 411 mm |
| Package depth | 275 mm |
| Package height | 90 mm |
| Package weight | 2.68 kg |
| Technical details | |
| Product colour | Black, Orange |
| Firmware upgradeable | Yes |
| Compliance certificates | CE, Federal Communications Commission (FCC), RoHS |
| Memory | |
| Packet buffer memory | 1.5 MB |
| Certificates | |
| Certification | CE, FCC, RoHS |
| Compliance certificates | CE, Federal Communications Commission (FCC), RoHS |
