My Cart
You have no items in your shopping cart.
Maximum data transfer rate | 100 Mbit/s |
---|---|
SKU | AT-MC102XL |
EAN | 5054629713860 |
Manufacturer | Allied Telesis |
Availability | In Stock |
Product |
![]() Popular
Allied Telesis 100TX to 100FX (SC) sta...
£127.80
£106.50
|
![]() Recommended
Veracity Highwire network media conver...
£166.74
£138.95
|
![]()
£135.00
£112.50
|
![]() Bestseller
Cisco MGBSX1 SFP Transceiver | Gigabit...
£138.88
£115.73
|
![]() New
Longshine LCS-C842MT network media con...
£124.20
£103.50
|
![]() Hot Product
StarTech.com 10/100 Mbps Multi Mode Fi...
£107.20
£89.33
|
---|---|---|---|---|---|---|
SKU |
AT-MC102XL
|
VHW-HW
|
AT-MC102XL-20
|
MGBSX1
|
LCS-C842MT
|
ET90110SC2
|
Description |
Fibre connections
The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre. Auto-negotiation and MissingLink™ The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost. Simple installation Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This ‘Link Test’ feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment. Standalone or rackmounted Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. |
HIGHWIRE Ethernet Over Coax Device (Single Unit). HIGHWIRE turns any analogue video cable into a high-speed network connection, enabling the replacement of analogue cameras with IP cameras without installing any new cabling. - HIGHWIRE can be powered by legacy 12 Volt DC or 24 Volt AC supplies. - HIGHWIRE turns any analogue video cable into a high-speed network connection, enabling the replacement of analogue cameras with IP cameras without installing any new cabling or configuration. - HIGHWIRE can provide a full-duplex 100BASE-T network connection, with no bandwidth restrictions, over 500 metres of RG-11 cable, or over 280 metres of CCTV-grade RG-59 cable.
|
Our media converters allow you to connect disparate cable types in your network. Media conversion offers you the ability to:
-Extend network distances by adding fiber only where it is needed. -Add new devices without replacing costly cable. -Keep pace with changing technology. -Integrate high-bandwidth devices into the network. |
The Cisco MGBSX1 Transceiver MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) is an easy-to-install module that provides a simple way to add fiber connectivity to Cisco 100, 200, 300, and 500 Series switches.
The MGBSX1 transceiver is available for single-mode or multimode fiber-optic cabling and can support distances from 100 meters up to 500 meters. |
The LCS-C842 is a compact, reliable media conversion solution that provides network administrators with a cost-effective solution for migrating or upgrading copper-based networks to fiber optic-based networks. Whether data is transmitted over multi-mode, single mode or long-haul single mode fiber optics, or operating in full or half-duplex, the LCS-C842 is capable of handling the various cable configurations.
Link Fault Signaling - The LFS feature supports the creation of a redundant or secondary connection. This can be an ideal solution for those mission-critical or constant service applications such as fiber To The Building (FTTB) or Fiber To The Curb (FTTC). The LFS LED provides immediately indication of when a cable has been severed or when some other cause of disruption in service has occurred. Simultaneously, data transmission will be switched to the redundant link resulting in 'non-stop' network connectivity. Loopback Test - Once enabled via a DIP-switch, the Remote or Local Loopback test feature allows the administrator to instantly determine the status of the cable connection. This offers a simpler approach to troubleshooting; no more manual inspection of cables and wiring closets. Support NWay - The LCS-C842 takes advantage of intelligent connection technology to support auto-negotiation, thereby eliminating the hassle of manually configuring or monitoring the settings. This ensures a plug-n-play' operability. Cable Flexibility & Scalability - The LCS-C842 allows you to install fiber cabling anywhere within the network diagram without having to replace existing copper-based. It's compact, modular design facilitates easy deployment in a narrow desktop location, wall-mount or as a multi-unit configuration based on the LCS-C819 12-slot standard 19" rack-mount chassis. Plus, connecting the LCS-C842 media converter to fiber segments extends distances between networking nodes of up to 60,000 meters. - Device DIP switches allow multiple configuration options; - Automatic MDI/MDI-X selection on RJ-45 port; - Auto-negotiation, NWay support on RJ-45; - Link Fault Signalling (LFS); - Remote and local loop back test; - LEDs for at-a-glance device status; - Extends distances ranging from 2km (multi-mode fiber) to 60km (single mode fiber); - Store-and-forward at full wire speed; - Internal and external power supply options; - FCC Class A & CE approved. |
Convert and extend a 10/100 Mbps Ethernet connection up to 1.2 miles/2km over Multi Mode SC fiber
The ET90110SC2 10/100 Mbps Multimode Fiber Media Converter SC (2 km) lets you extend a Fast Ethernet network (10/100Mbps) over multimode fiber, at distances up to 2 km (1.2 miles). A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100Base-T) network to remote network segments over a 100Base-FX fiber backbone, the media converter is designed to offer a durable and convenient Ethernet-to-fiber solution, featuring an all-steel chassis, and a simple plug-and-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). Backed by a StarTech.com 2-year warranty and free lifetime technical support. The StarTech.com Advantage - Link loss forwarding, remote status monitoring help ensure maximum up-time - Provides Ethernet to Fiber conversion as a standalone device, or can be installed into the ETCHS2U 20 slot chassis for added versatility - Rugged steel casing for durability in harsh environments |
Short Description |
100TX to 100FX (SC) standalone media converter
|
Ethernet over coax converter
|
100TX to 100FX (SC) standalone media converter
|
MGBSX1 SFP Transceiver | Gigabit Ethernet (GbE) 1000BASE-SX Mini-GBIC (MGBSX1)
|
Media Converter, 10/100Base-TX to 100Base-FX
|
StarTech.com .
|
Manufacturer |
Allied Telesis
|
Veracity
|
Allied Telesis
|
Cisco
|
Longshine
|
StarTech.com
|