APC AP8858EU3 power distribution unit (PDU) 20 AC outlet(s) 0U
£710.75
£592.29
NetShelter Metered Rack PDU, 0U, 1PH, 3.7kW 230V 16A, x18C13 and x2C19 outlets, IEC 309 cord
AC outlets quantity | 20 AC outlet(s) |
---|---|
SKU | AP8858EU3 |
EAN | 0731304277033 |
Manufacturer | APC |
Availability | In Stock |
APC Metered Rack PDUs offer resilient power distribution and actively measure, display, and log volts, amps, real power (kW) & energy (kWh). This PDU offers LCD display, real-time remote monitoring and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment. Historical reporting enables users to meter customer power usage, optimize energy use as well as plan for capacity . This zeroU PDU can operate at up to 60 degrees Celsius and can be accessed, configured, and managed remotely via EcoStruxure IT, Web, SNMP and Command Line Interface. Power is supplied to the PDU at 220-240 volts via IEC 309 2P + E plug with a 3m (10 ft) cord while power comes out at 230 volts through (18) C13 and (2) C19 locking outlets. It integrates with EcoStruxure IT, and daisy-chaining is supported to monitoring up to 4 PDUs from 1 IP address as well as a local USB port for easy local firmware updates As a Green Premium product, this unit comes with a verified product environment profile, including carbon footprint, scope 3 emissions and end of life instructions.
Design | |
---|---|
PDU types | Metered |
Mounting | Vertical |
Certification | CSA C22.2 No. 60950,IEC 60950,METI Denan,UL 60950-1,VDE RoHS, REACH |
Rack capacity | 0U |
Ports & interfaces | |
AC outlets quantity | 20 AC outlet(s) |
AC outlet types | C13 coupler, C19 coupler |
Power plug | IEC309 |
Output connections | 18x IEC 320 C13 2x IEC 320 C19 |
Input connection type | IEC 309 16A 2P+E |
Features | |
Cable length | 3 m |
Certification | CSA C22.2 No. 60950,IEC 60950,METI Denan,UL 60950-1,VDE RoHS, REACH |
Management features | |
Monitoring | Current, Power, Voltage |
Ergonomics | |
Cable length | 3 m |
Power | |
Maximum power | 3680 W |
Nominal output voltage | 230 V |
Maximum total current draw per phase | 16 A |
Maximum input current per phase | 16 A |
Load capacity | 3680 VA |
AC input frequency | 50 - 60 Hz |
Certificates | |
---|---|
Certification | CSA C22.2 No. 60950,IEC 60950,METI Denan,UL 60950-1,VDE RoHS, REACH |
Operational conditions | |
Operating temperature (T-T) | 5 - 45 °C |
Storage temperature (T-T) | -25 - 65 °C |
Storage relative humidity (H-H) | 5 - 95% |
Operating relative humidity (H-H) | 5 - 95% |
Weight & dimensions | |
Dimensions (WxDxH) | 56 x 44 x 902 mm |
Weight | 2.93 kg |
Width | 56 mm |
Depth | 44 mm |
Height | 902 mm |
Package width | 162 mm |
Package depth | 107 mm |
Package height | 1124 mm |
Package weight | 4.92 kg |
Package dimensions (WxDxH) | 162 x 107 x 1124 mm |
Packaging data | |
Package width | 162 mm |
Package depth | 107 mm |
Package height | 1124 mm |
Package weight | 4.92 kg |
Package dimensions (WxDxH) | 162 x 107 x 1124 mm |
Technical details | |
Total carbon footprint (kg of CO2e) | 13349.44 |
Logistics data | |
Total carbon footprint (kg of CO2e) | 13349.44 |
You may also be interested in
Product |
![]() Recommended
APC AP8858EU3 power distribution unit...
£710.75
£592.29
|
![]()
£698.00
£581.67
|
![]() Bestseller
APC AP8853 power distribution unit (PD...
£732.42
£610.35
|
![]() Hot Product
APC AP8858 power distribution unit (PD...
£666.89
£555.74
|
![]() Popular
APC NetShelter Rack PDU, Metered, 0U,...
£784.99
£654.16
|
![]()
£554.54
£462.12
|
---|---|---|---|---|---|---|
SKU |
AP8858EU3
|
AP7516
|
AP8853
|
AP8858
|
AP8841
|
AP6038A
|
Description |
APC Metered Rack PDUs offer resilient power distribution and actively measure, display, and log volts, amps, real power (kW) & energy (kWh). This PDU offers LCD display, real-time remote monitoring and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment. Historical reporting enables users to meter customer power usage, optimize energy use as well as plan for capacity . This zeroU PDU can operate at up to 60 degrees Celsius and can be accessed, configured, and managed remotely via EcoStruxure IT, Web, SNMP and Command Line Interface. Power is supplied to the PDU at 220-240 volts via IEC 309 2P + E plug with a 3m (10 ft) cord while power comes out at 230 volts through (18) C13 and (2) C19 locking outlets. It integrates with EcoStruxure IT, and daisy-chaining is supported to monitoring up to 4 PDUs from 1 IP address as well as a local USB port for easy local firmware updates As a Green Premium product, this unit comes with a verified product environment profile, including carbon footprint, scope 3 emissions and end of life instructions.
|
APC Basic Rack 14.4kW. Product colour: Black. Input connection type: Hubbell CS8365C, Output connections: (6) IEC 320 C19. Cable length: 2.44 m. Nominal input voltage: 208 V, AC input frequency: 50 - 60 Hz, Maximum input current per phase: 50 A. Width: 437 mm, Depth: 254 mm, Dimensions (WxDxH): 437 x 254 x 44 mm
|
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. The output and input connections are (36) C13 & (6) C19, and the cable length is 3m. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
|
APC Metered Rack PDUs offer resilient power distribution and actively measure, display, and log volts, amps, real power (kW) & energy (kWh). This PDU offers LCD display, real-time remote monitoring and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment. Historical reporting enables users to meter customer power usage, optimize energy use as well as plan for capacity . This zeroU PDU can operate at up to 60 degrees Celsius and can be accessed, configured, and managed remotely via EcoStruxure IT, Web, SNMP and Command Line Interface. Power is supplied to the PDU at 220-240 volts via IEC C20 inlet (no cord provided) while power comes out at 100-230 volts through (18) C13 and (2) C19 locking outlets. It integrates with EcoStruxure IT, and daisy-chaining is supported to monitoring up to 4 PDUs from 1 IP address as well as a local USB port for easy local firmware updates As a Green Premium product, this unit comes with a verified product environment profile, including carbon footprint, scope 3 emissions and end of life instructions.
|
The APC Metered Rack PDU distributes reliable power within a rack through a single input and multiple output receptacles The AP8841 offers real-time remote monitoring of connected loads and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment The PDU can operate in a maximum ambient air temperature of up to 60°C (140°F) at full load The Network Management Card provides enhanced cybersecurity with secured interfaces and modified password policy The rack PDU integrates with EcoStruxure IT through a Network Management Card and can be accessed and configured via Web, SNMP, and Command Line Interface. User-interactive LCD interface details current, real power, voltage, and energy measurements for local user access. Embedded log memory with historical reporting enables users to meter power usage, optimize energy usage, and plan for capacity The PDU's locking IEC outlets, when used with locking power cords reduce the probability of accidentally disconnecting cords and dropping loads The rack PDU supports daisy-chaining of up to 4 PDUs on a single IP address An environmental monitoring port is available for external temperature/humidity monitoring (sensor sold separately, model AP9335T or AP9335TH) The rack PDU comes with a standard two-year warranty Enables a quick recovery from overload events and breakers are ultra low profile. Packaging Includes PDU, Installation guide, Rack mounting brackets, Safety guide, Serial configuration cable
|
The APC by Schneider Electric Basic Rack Power Distribution Unit (PDU) distributes power to devices in the rack.
|
Short Description |
NetShelter Metered Rack PDU, 0U, 1PH, 3.7kW 230V 16A, x18C13 and x2C19 outlets, IEC 309 cord
|
APC Basic Rack 14.4kW, Black, Hubbell CS8365C, (6) IEC 320 C19, 2.44 m, 208 V, 50 - 60 Hz
|
NetShelter Metered Rack PDU, 0U, 1PH, 7.4kW 230V32A, 36 C13 and 6 C19 outlets, IEC 309 2P+E cord
|
NetShelter Metered Rack PDU, 0U, 1PH, 3.3kW 208V 16A or 3.7kW 230V 16A, 18 C13 and 2 C19 outlets, C20 inlet
|
NetShelter Rack PDU, Metered, 0U, 5.0kW 200V and 208V 30A, (36) C13 and (6) C19 outlets
|
Rack PDU, Basic, 0U/1U, 220-240V, 48A, (3) C19, Black
|
Manufacturer |
APC
|
APC
|
APC
|
APC
|
APC
|
APC
|