ARCTIC P12 PWM (Black/Black) Pressure-optimised 120 mm Fan with PWM

In stock

SKU

ACFAN00119A

Add to Compare

£8.24 £6.87

120 mm, 200 - 1800 RPM, PWM, 56.3 CFM, 95.65 m3/h, 12 V DC, 4-pin, 139 g, Black/Black

Optimised for static pressure
Ideal choice on heatsinks, radiators and (partly-) covered case vents
Push- or pull-configuration
PWM signal adjusts fan speed
Newly developed, very quiet motor
Extended life span
Available in three sleek colors

More Information
Suitable for	Computer case
Type	Fan
SKU	ACFAN00119A
EAN	4895213701389
Manufacturer	ARCTIC
Availability	In Stock
PDF URLs	View PDF

Optimised for Static Pressure

During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM is particularly suitable for use on heatsinks and radiators.

Strong Cooling Performance

Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans.
In internal performance tests leveled to 28 dB (A), the new P-fans left many competitors behind.

More Efficient Technology

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.

200 to 1800 RPM regulated via PWM

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM.
In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Our coolers have pushed the limits further every year - and all that at dropping noise levels. We have put our utmost effort into innovative technologies and fair prices, what made us well known for products with an unparalleled price/performance ratio. We provide you headroom for over-clocking and guarantee you lowest noise levels at affordable prices.

Performance
Suitable location	Computer case
Fan connector	4-pin
Pulse-width modulation (PWM) support	Yes
Rotational speed (min)	200 RPM
Rotational speed (max)	1800 RPM
Noise level	0.3 sone
Bearing type	Fluid Dynamic Bearing (FDB)
Noise level (high speed)	24.5 dB
Type	Fan
Fan diameter	12 cm
Supported processor sockets	Not supported
Compatible processor series	Not supported
Maximum airflow	56.3 cfm
Maximum air pressure	2.2 mmH2O
Airflow	95.65 m³/h
Number of fans	1 fan(s)
Number of fan blades	5
Design
Fan connector	4-pin
Number of fans	1 fan(s)
Product colour	Black
Cable length	0.4 m
Number of fan blades	5
Technical details
Noise level (high speed)	24.5 dB
Type	Fan
Fan diameter	12 cm
Supported processor sockets	Not supported
Compatible processor series	Not supported
Maximum airflow	56.3 cfm
Maximum air pressure	2.2 mmH2O
Airflow	95.65 m³/h
Number of fans	1 fan(s)
Cable length	0.4 m
Fan connector	4-pin
Ports & interfaces
Fan connector	4-pin
Power
Starting voltage	3.9 V
Voltage	12 V
Rated current	0.08 A
Power consumption (typical)	0.96 W

Colour
Product colour	Black
Weight & dimensions
Package depth	123 mm
Package width	123 mm
Package height	27 mm
Width	120 mm
Package weight	170 g
Depth	120 mm
Height	25 mm
Weight	139 g
Cable length	0.4 m
Packaging data
Package depth	123 mm
Package width	123 mm
Package height	27 mm
Package weight	170 g
Package type	Box
Packaging content
Screws included	Yes
Number of screws	4
Package type	Box
Other features
Country of origin	China
Harmonized System (HS) code	84733080
Logistics data
Harmonized System (HS) code	84733080

You may also be interested in

Compare Products
Product	Bestseller ARCTIC P12 PWM (Black/Black) Pressure-... £8.24 £6.87	StarTech.com 92x25mm Ball Bearing Quie... £9.65 £8.04	Recommended StarTech.com 70x15mm Replacement Ball... £8.22 £6.85	StarTech.com 60x25mm High Air Flow Dua... £12.14 £10.12	Popular StarTech.com 50x10mm Replacement Ball... £9.37 £7.81	StarTech.com 80x25mm Dual Ball Bearing... £10.08 £8.40
SKU	ACFAN00119A	FAN9X25TX3L	FAN7X15TX3	FAN6X25TX3H	FAN5X1TX3	FANBOX
Description	Our coolers have pushed the limits further every year - and all that at dropping noise levels. We have put our utmost effort into innovative technologies and fair prices, what made us well known for products with an unparalleled price/performance ratio. We provide you headroom for over-clocking and guarantee you lowest noise levels at affordable prices.	Add additional chassis cooling with a 92mm ball bearing fan This quiet, dual ball-bearing (9.25cm) Case Fan offers a cost-effective solution for replacing a non-functional or noisy fan in your PC. Powered through a simple TX3 connection to the host computer power supply, the 8cm case fan helps keep your computer running at optimal temperatures for stable system performance. The StarTech.com Advantage - A dual ball bearing design ensures reliability and longer life - A built-in tachometer allows for easy monitoring of the fan performance - Backed by a StarTech.com 2-year warranty and free lifetime technical support	Add additional chassis cooling with a 70mm ball bearing fan This versatile 70mm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, and features a dual ball bearing design that ensures reliable cooling and longer fan lifespan. The fan can be used to replace the fan component of some CPU coolers or mounted to the side panel of a computer case and features a tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status information. The StarTech.com Advantage - A dual ball bearing design ensures reliability and longer life - Backed by a StarTech.com 2-year warranty and free lifetime technical support	Add additional chassis cooling with a 60mm high flow case fan This 6cm x 2.5cm (5000 RPM) Computer Case Fan helps prevent computer systems from overheating, thereby increasing efficiency and stability. The fan features a TX3 connection and a built-in tachometer that sends RPM signals to your motherboard - a high-performance solution that can help avoid overheating and system failure. The StarTech.com Advantage - A dual ball bearing design ensures reliability and longer life - A built-in tachometer allows for easy monitoring of the fan performance - Higher performance fan with Increased air flow for warmer environments or higher performance components	Add additional chassis cooling with a 50mm ball bearing fan This versatile 5cm x 1cm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, and features a dual ball bearing design that ensures reliable cooling and longer fan lifespan. The StarTech.com Advantage - Exhausts hot air out of a PC, increasing dependability and extending component lifetime - Cools your PC, increasing dependability and extending component lifetime - Comes complete with a TX3 to LP4 adapter	Add additional chassis cooling with a 80mm ball bearing fan This versatile PC case fan is designed to fit a broad range of computer case designs, to circulate cool air into the case, or exhaust warm air out - preventing problems due to overheating components. A quiet cooling solution, the near silent 8cm fan features a brushless ball bearing design coupled with a high-efficiency blade layout, capable of moving 37 CFM of air. This broadly compatible PC cooling solution can be powered through a simple LP4 connection to the computer power supply. The StarTech.com Advantage - A dual ball bearing design ensures reliability and longer life - Backed by a StarTech.com 2-year warranty and free lifetime technical support
Short Description	120 mm, 200 - 1800 RPM, PWM, 56.3 CFM, 95.65 m3/h, 12 V DC, 4-pin, 139 g, Black/Black	StarTech.com 92x25mm Ball Bearing Quiet Computer Case Fan w/ TX3 Connector - 3 pin case Fan - TX3 Fan - 90mm Fan	StarTech.com 70x15mm Replacement Ball Bearing Computer Case Fan w/ TX3 Connector - 3 pin case Fan - TX3 Fan - 70mm Fan	StarTech.com 60x25mm High Air Flow Dual Ball Bearing Computer Case Fan w/ TX3 - 3 pin case Fan - TX3 Fan - 60mm Fan	StarTech.com 50x10mm Replacement Ball Bearing Computer Case Fan TX3/LP4 Connector - 3 pin case Fan - TX3 Fan - 50mm Fan	StarTech.com 80x25mm Dual Ball Bearing Computer Case Fan w/ LP4 Connector - computer case Fan - 80mm Fan - pc Fan
Manufacturer	ARCTIC	StarTech.com	StarTech.com	StarTech.com	StarTech.com	StarTech.com