D-Link 8-port 10GBASE-T and 2-port SFP+ Multi-Gigabit Smart Managed Switch
£1,011.36
£842.80
8 x 100M/1G/2.5G/5G/10G, 2 x 10G SFP+, 200 Gbps, 148.8 Mpps, 32K MAC, 330 x 200 x 44 mm
Power over ethernet | No |
---|---|
Stackable | Yes |
Ports type | 10G Ethernet (100/1000/10000) |
Ports quantity | 8 |
SKU | DXS-1210-10TS |
EAN | 0790069409325 |
Manufacturer | D-Link |
Availability | In Stock |
PDF URLs |
View PDF |
10 Gigabit Ethernet Smart Managed Switches
The D-Link DXS-1210 Series conveniently offers a range of 10-Gigabit copper and fiber port combinations to cost-effectively alleviate network congestion. Select models are equipped with SFP+ or SFP28 ports for 10G/25G expandable network designed for scalability and can auto-detect surveillance and voice data to ensure uninterrupted video footage and jitter-free VoIP calls.
Alleviate Network Congestion
Add 10‑Gigabit Ethernet connectivity with these affordable high-performance switches. Designed for deployment in small to medium-sized business (SMB) core networks and powerful enough for enterprise aggregation applications.
Convenient Layer 2 & Layer 3 Lite Configurability
The DXS-1210 Series can be deployed as a Layer 2 aggregation switch with features such as port mirroring, STP, and LACP. When implemented as a Layer 3 Lite core switch, IP interfaces, ARP, IPv6 ND, Default Routing, and Static Routing can be applied for efficient routing applications.
An Added Line of Defense Against Attacks
The DXS-1210 Series defends your network with D-Link’s innovative Safeguard Engine™ to neutralize threats such as malicious network flooding attacks, ARP spoofing, and bogus DHCP IP addressing. The DXS-1210 Series supports 802.1X port-based and host-based authentication, allowing the network to be authenticated through external RADIUS servers.
Unhindered Surveillance & VoIP with a Simple Click
If you need surveillance or VoIP, there is no need to build a dedicated network. With the DXS-1210 Series, expediting latency-intolerant services such as surveillance and VoIP through the existing network can’t be any easier. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly and your VoIP calls will be crystal-clear from beginning to end, even during peak working hours.
Better for Your Budget, Better for the Planet
When low-traffic or idle interface ports are detected, the DXS-1210 Series automatically transitions them into a low-power state, substantially reducing overall device power consumption. Furthermore, the DXS-1210 Series can determine the approximate length of cables attached to each port to apply just enough power for data transmission on that link, saving even more power while lowering total cost of ownership (TCO).
The D-Link DXS-1210 Series conveniently offers a range of 10-Gigabit copper and fiber port combinations to cost-effectively alleviate network congestion. Select models are equipped with SFP+ or SFP28 ports for 10G/25G expandable network designed for scalability and can auto-detect surveillance and voice data to ensure uninterrupted video footage and jitter-free VoIP calls.
Alleviate Network Congestion
Add 10‑Gigabit Ethernet connectivity with these affordable high-performance switches. Designed for deployment in small to medium-sized business (SMB) core networks and powerful enough for enterprise aggregation applications.
Convenient Layer 2 & Layer 3 Lite Configurability
The DXS-1210 Series can be deployed as a Layer 2 aggregation switch with features such as port mirroring, STP, and LACP. When implemented as a Layer 3 Lite core switch, IP interfaces, ARP, IPv6 ND, Default Routing, and Static Routing can be applied for efficient routing applications.
An Added Line of Defense Against Attacks
The DXS-1210 Series defends your network with D-Link’s innovative Safeguard Engine™ to neutralize threats such as malicious network flooding attacks, ARP spoofing, and bogus DHCP IP addressing. The DXS-1210 Series supports 802.1X port-based and host-based authentication, allowing the network to be authenticated through external RADIUS servers.
Unhindered Surveillance & VoIP with a Simple Click
If you need surveillance or VoIP, there is no need to build a dedicated network. With the DXS-1210 Series, expediting latency-intolerant services such as surveillance and VoIP through the existing network can’t be any easier. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly and your VoIP calls will be crystal-clear from beginning to end, even during peak working hours.
Better for Your Budget, Better for the Planet
When low-traffic or idle interface ports are detected, the DXS-1210 Series automatically transitions them into a low-power state, substantially reducing overall device power consumption. Furthermore, the DXS-1210 Series can determine the approximate length of cables attached to each port to apply just enough power for data transmission on that link, saving even more power while lowering total cost of ownership (TCO).
Management features | |
---|---|
ARP inspection | Yes |
Switch type | Managed |
Web-based management | Yes |
Quality of Service (QoS) support | Yes |
Multicast support | Yes |
MIB support | Yes |
Switch layer | L2/L3 |
Ports & interfaces | |
SFP+ module slots quantity | 2 |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | 10G Ethernet (100/1000/10000) |
Fiber optic connector | SFP+ |
Console port | RJ-45 |
Network | |
Cable types supported | Cat6 |
Networking standards | IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3z |
Head-of-line (HOL) blocking | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Port mirroring | Yes |
Number of VLANs | 4094 |
Link aggregation | Yes |
Flow control support | Yes |
Ethernet LAN data rates | 100,1000,2500,5000,10000 Mbit/s |
Broadcast storm control | Yes |
Auto MDI/MDI-X | Yes |
10G support | Yes |
IGMP snooping | Yes |
Data transmission | |
Jumbo frames | 10000 |
MAC address table | 32000 entries |
Switching capacity | 200 Gbit/s |
Store-and-forward | Yes |
Number of queues | 8 |
Jumbo frames support | Yes |
Forwarding rate | 148.8 Mpps |
Number of VLANs | 4094 |
Security | |
Loop protection | Yes |
IGMP snooping | Yes |
Access Control List (ACL) | Yes |
Password protection | Yes |
DHCP features | DHCP server, DHCP client |
Multicast features | |
Multicast support | Yes |
Design | |
Form factor | 1U |
Product colour | Black, Silver |
Stackable | Yes |
LED indicators | Yes |
Rack mounting | Yes |
Number of fans | 1 fan(s) |
Certification | CE, FCC, RCM, VCCI, IC, BSMI, cUL, BSMI, CB |
Performance | |
Noise level | 46.6 dB |
Stackable | Yes |
Power | |
Power consumption (max) | 43.26 W |
AC input voltage | 100 - 240 V |
AC input frequency | 50/60 Hz |
Power source | AC |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | No |
Operational conditions | |
---|---|
Storage temperature (T-T) | -40 - 70 °C |
Storage relative humidity (H-H) | 0 - 95% |
Operating temperature (T-T) | -5 - 50 °C |
Operating relative humidity (H-H) | 0 - 95% |
Virtual LAN features | |
VLAN support | Yes |
Number of VLANs | 4094 |
Weight & dimensions | |
Width | 330 mm |
Depth | 200 mm |
Height | 44 mm |
Weight | 2.17 kg |
Packaging content | |
Quick start guide | Yes |
Optical fiber | |
Fiber optic connector | SFP+ |
Technical details | |
Form factor | 1U |
Product colour | Black, Silver |
Stackable | Yes |
Noise level | 46.6 dB |
Rack mounting | Yes |
Certificates | |
Certification | CE, FCC, RCM, VCCI, IC, BSMI, cUL, BSMI, CB |
Indication | |
LED indicators | Yes |
Packaging data | |
Quick start guide | Yes |
Other features | |
Ethernet LAN data rates | 100,1000,2500,5000,10000 Mbit/s |
You may also be interested in
Product |
![]()
£1,011.36
£842.80
|
![]() Bestseller
Juniper EX2300-48P network switch Mana...
£1,035.50
£862.92
|
![]() New
Juniper EX2300-48T network switch Mana...
£952.66
£793.88
|
![]() Recommended
Juniper EX3400-24P network switch Mana...
£1,173.58
£977.98
|
![]() Hot Product
Cisco IE 1000-4P2S-LM Managed Gigabit...
£992.33
£826.94
|
![]() Popular
Zyxel RGS200-12P Managed L2 Gigabit Et...
£1,017.56
£847.97
|
---|---|---|---|---|---|---|
SKU |
DXS-1210-10TS
|
EX2300-48P
|
EX2300-48T
|
EX3400-24P
|
IE-1000-4P2S-LM
|
RGS200-12P-ZZ0101F
|
Description |
10 Gigabit Ethernet Smart Managed Switches
The D-Link DXS-1210 Series conveniently offers a range of 10-Gigabit copper and fiber port combinations to cost-effectively alleviate network congestion. Select models are equipped with SFP+ or SFP28 ports for 10G/25G expandable network designed for scalability and can auto-detect surveillance and voice data to ensure uninterrupted video footage and jitter-free VoIP calls. Alleviate Network Congestion Add 10‑Gigabit Ethernet connectivity with these affordable high-performance switches. Designed for deployment in small to medium-sized business (SMB) core networks and powerful enough for enterprise aggregation applications. Convenient Layer 2 & Layer 3 Lite Configurability The DXS-1210 Series can be deployed as a Layer 2 aggregation switch with features such as port mirroring, STP, and LACP. When implemented as a Layer 3 Lite core switch, IP interfaces, ARP, IPv6 ND, Default Routing, and Static Routing can be applied for efficient routing applications. An Added Line of Defense Against Attacks The DXS-1210 Series defends your network with D-Link’s innovative Safeguard Engine™ to neutralize threats such as malicious network flooding attacks, ARP spoofing, and bogus DHCP IP addressing. The DXS-1210 Series supports 802.1X port-based and host-based authentication, allowing the network to be authenticated through external RADIUS servers. Unhindered Surveillance & VoIP with a Simple Click If you need surveillance or VoIP, there is no need to build a dedicated network. With the DXS-1210 Series, expediting latency-intolerant services such as surveillance and VoIP through the existing network can’t be any easier. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly and your VoIP calls will be crystal-clear from beginning to end, even during peak working hours. Better for Your Budget, Better for the Planet When low-traffic or idle interface ports are detected, the DXS-1210 Series automatically transitions them into a low-power state, substantially reducing overall device power consumption. Furthermore, the DXS-1210 Series can determine the approximate length of cables attached to each port to apply just enough power for data transmission on that link, saving even more power while lowering total cost of ownership (TCO). |
The Juniper Networks® EX2300 line of Ethernet switches offers a compact, high-performance solution for supporting today’s converged network access deployments.
Each EX2300 switch includes an ASIC-based Packet Forwarding Engine (PFE) with an integrated CPU to consistently deliver wire-rate forwarding, even with all control plane features enabled. Based on existing, field-proven Juniper Networks technology, the PFE brings the same level of carrier-class performance and reliability to the EX2300 switches that Juniper Networks routers bring to the world’s largest service provider networks. Select EX2300 models also support the 802.3af Class 3 Power over Ethernet (PoE) and 802.3at PoE+ standards for supporting networked devices such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones in converged networks. The PoE-enabled EX2300 switches include a maximum system budget of 750 watts to deliver up to 30 watts to select ports. Multiple EX2300 models are available, including versions offering multigigabit (up to 2.5 Gbps) PoE+ access ports that can accommodate higher-speed IEEE 802.11ac Wave 2 access points, enabling the switches to support more wireless users. |
The Juniper Networks EX2300 Ethernet Switch offers an economical, entry-level, standalone solution for accesslayer deployments in branch and remote offices, as well as enterprise campus networks.
To simplify network operations, the EX2300 is hardware-ready to act as a satellite device to support a Juniper Networks Junos Fusion Enterprise deployment, which can combine several wiring closets into one logical management platform. For smaller networks, up to four EX2300 switches can be interconnected in a Virtual Chassis configuration, allowing them to be managed as a single switch. The Juniper Networks® EX2300 line of Ethernet switches offers a compact, highperformance solution for supporting today’s converged network access deployments. Each EX2300 switch includes an ASIC-based Packet Forwarding Engine (PFE) with an integrated CPU to consistently deliver wire-rate forwarding, even with all control plane features enabled. Based on existing, field-proven Juniper Networks technology, the PFE brings the same level of carrier-class performance and reliability to the EX2300 switches that Juniper Networks routers bring to the world’s largest service provider networks. Select EX2300 models also support the 802.3af Class 3 Power over Ethernet (PoE) and 802.3at PoE+ standards for supporting networked devices such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones in converged networks. The PoE-enabled EX2300 switches include a maximum system budget of 740 watts to deliver up to 30 watts to select ports. |
EX3400 Overview
EX3400 Ethernet Switches are a cost-effective solution for today’s most demanding converged data, voice, and video enterprise access networks. The compact, fixed-configuration 1U devices offer levels of performance and management previously available only with high-end access switches. Featuring models offering either 24 or 48 10/100/1000BASE-T ports, the EX3400 switches also support IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering networked telephones, video cameras, wireless LAN access points, and other IP devices. Four front-panel dual-mode (GbE/10GbE) small form-factor pluggable transceiver (SFP/SFP+) uplink ports and two 40GbE quad SFP+ (QSFP+) ports are also available for connecting the switches to upstream devices. The EX3400 supports Juniper’s unique Virtual Chassis technology for interconnecting up to 10 switches that can be managed as a single device. The EX3400 can also be configured as a satellite device in a Junos Fusion Enterprise deployment, which aggregates large numbers of access switches into a logical management platform. Innovative Switch Design Innovative switch design reduces cost and complexity, while unified management and automation tools consolidate system monitoring. Centralized Management When deployed as satellite devices in a Junos Fusion Enterprise environment, large numbers of EX3400 switches can be managed from a single interface. Eight QoS Queues Eight QoS queues per switch port ensure proper prioritization of voice, video, and multiple levels of data traffic, with room to converge other networks, such as building automation and video security systems. Virtual Chassis With Virtual Chassis technology, multiple interconnected EX Series switches function as a single logical device, reducing operational expenses and simplifying management. Carrier-Class Reliability Based on a field-proven Juniper architecture and the Junos OS, EX Series switches deliver carrier-class reliability for every application. High Port Densities and Wire-Speed Performance High 1GbE and 10GbE port densities and wire-speed performance provide flexibility in creating network topologies. |
The Cisco® Industrial Ethernet (IE) 1000 Series Switches are compact rugged switches aimed to operational technology (OT) users with limited IT network knowledge. The IE 1000 Series Switches provide an easy transformation from the legacy factory to digital solution. For machine builders and machine-to-machine (M2M) solutions is an attractive entry level product as a GUI-based, lightly-managed switch. The IE 1000 is a good fit for locations with harsh temperatures and small spaces, and is Power over Ethernet (PoE) capable with and zero IT management.
The IE 1000 is ideal for industrial Ethernet applications where small and easy-to-be-managed hardened products are required, including factory automation, intelligent transportation systems, city-surveillance programs, building automations etc. The Cisco IE 1000 Series Switches complement the current industrial Ethernet portfolio of related Cisco industrial switches, such as the Cisco IE 2000, IE 3000, IE 4000 and IE 5000 Series managed Switches. The IE 1000 can be easily installed on your network. Through a user-friendly web device manager, the IE 1000 provides easy out-of-the-box configuration and simplified operational manageability to deliver advanced and secure multiservices over industrial networks. Features and Benefits The Cisco IE 1000 Series Switches are designed for low cost, low ports, and small sizes. They offer: - Scalability: Four models are available supporting 5, 6, 8 and 10 Ethernet ports, with Fast Ethernet (FE) and Gigabit Ethernet (GE), copper and fiber uplinks options - Easy integration: Zero-touch IP discovery or Dynamic Host Configuration Protocol (DHCP)IP addressing and simple web GUI-based management - Fast startup time: Starts 30 seconds from cold boot - Manageability: Web GUI interface, and diagnostics and analysis options through Simple Network Management Protocol (SNMP) and syslog - Security: secure access; port-security - Minimize data load: VLAN aware, Internet Group Management Protocol (IGMP) and DHCP snooping to filter unwanted data - Lightly-managed: Spanning-tree protocol (STP), Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol aware - Gigabit uplink: Two fiber-optic SFP based. uplink for up to 50 miles (80 kilometers) links - Industrial PoE: Up to eight PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models - Redundant voltage feeds, alarm relays support and DIN rail mount - Industrial environmental compliance and certifications |
12-port GbE Managed PoE Switch
Along with the complete commercial product portfolio that offers customers with total network solutions, Zyxel introduces the new RGS Series of PoE switches with ruggedized design concepts to meet stringent outdoor or harsh network deployment scenarios. The special mechanism enables RGS200-12P to operate in outdoor, factory or other harsh environments for surveillance. In addition, it is also easy to manage RGS200-12P through a user-friendly Webbased GUI. Benefits Rugged and reliable design for harsh environments Equipped with fanless and IP30 standard metal mechanism, the Zyxel RGS200-12P is able to deliver great thermal control and tolerate the dustiest deployments with ease, whether installed on a DIN rail or wall mounted for the most efficient use of cabinet space. Designed to handle temperatures ranging from -40°C to 75°C, the RGS200-12P can be placed in a variety of challenging environments and be adapted to broad range of field applications. When switching is applied normally in outdoor settings, ESD (electrostatic discharge), DC and Ethernet surge protection prevent the loss of business revenue and productivity due to damage or fatigue caused by power disturbances. Quick failover for stable connectivity When deployed in harsher conditions, such as factory or outdoor settings, the Zyxel RGS200-12P creates fault-tolerant networks with redundant ring technology and rapid self-recovery capability to prevent interruptions. In the event of downtime caused by a network error, the rapid failover will restore normal operation in less than 20 ms. The switch’s dual DC power inputs and reverse power protection feature ensure continuous uptime and reliable operation. Trouble-free installation and easy extendibility This rugged L2 Managed PoE switch comes with eight (8) 10/100/1000 Base-T copper PoE ports and four (4) 100/1000-Base-X SFP fiber interfaces. The switch also supports the 802.3at PoE plus standard, with each PoE port providing up to 30 W of power to efficiently accommodate the most power-hungry devices. The fiber uplink can extend the network to long-distance nodes up to 40 km (43,744 yards) away for added flexibility. |
Short Description |
8 x 100M/1G/2.5G/5G/10G, 2 x 10G SFP+, 200 Gbps, 148.8 Mpps, 32K MAC, 330 x 200 x 44 mm
|
48-port 10/100/1000BASE-T PoE+, 4 x 1/10GbE, 100W AC Power Consumption, 750W Total PoE Power Budget
|
EX2300 48 ports 10/100/1000BASE-T, 4 x 1/10 GbE SFP/SFP+
|
24xRJ-45, 2xQSFP+, 4xSFP+, 32000 MAC, 288 Gbit/s, 214 Mpps, 4096 VLANs, 9216 Jumbo Frames, 1U, 442x350x44mm, 5.74kg, Grey
|
4x RJ-45, 2x GE SFP, 4x POE/POE+, 48-54 V, 45.7x134x127 mm, 840 g
|
L2, 8x 100/1000 Mbps PoE, 4x SFP, 24 Gbps, 17.86 Mpps, 77 x 127.3 x 154 mm, 1450 g
|
Manufacturer |
D-Link
|
Juniper
|
Juniper
|
Juniper
|
Cisco
|
Zyxel
|