Origin Storage AXC7610 Netgear Compatible Direct Attach Copper Cable 10GBase-CU SFP+ (Passive Twinax 10m)

AXC761-10000S

SFP-H10GB-CU2M=

CAB-SPWR-30CM=

15216-LC-LC-MM-2=

FIB442150

- Direct Attach SFP+ copper cable (10GSFP+Cu)
- SFP+ connector on both sides
- Drives 10 Gigabit Ethernet (1 m distance)

Cisco SFP+ Copper Twinax (Figure 2) direct-attach cables are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. Cisco offers passive Twinax cables in lengths of 1, 1.5, 2, 2.5, 3 and 5 meters, and active Twinax cables in lengths of 7 and 10 meters.

The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack.

StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.

A StackPower cable has colors bands on the cable ends, green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.

An XPS cable has a color band on the cable ends as well, red on one end and yellow on the other end. This cable can only be used to connect Catalyst 3750-X or 3560-X switch to an XPS. Note that the connector with the red band can only connect to an XPS while the connector with the green and blue band can connect to Catalyst 3750-X or 3560-X switch.

The Cisco Catalyst 3750-X Series Switches come with four power supply options and any of them can be used on any switch in a stack and in any combination.

Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility.

The 50/125µm OM3 multimode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. This 50/125 OM3 multimode fiber optic cable is ideal for connecting 10G SR, 10G LRM, SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections. The multimode patch cords are manufactured using LSZH cables which conform to IEC, EIA TIA or Telcordia standards.

SFP+ DirectAttach 1m for XSM7224

10GBASE-CU Twinax SFP+ network cable, 2m

30cm StackPower cable, Spare

Fiber Patchcord LC - LC Multi Mode 2m

Optical Fibre Cable, LC-LC, Multimode, Duplex, OM3 (Aqua Blue) 150m

Netgear

Cisco

Cisco

Cisco

Microconnect