PLANET IPOE-E302 network extender Network transmitter Black, Grey 10, 100, 1000 Mbit/s
£149.40
£124.50
Industrial 1-Port 802.3bt PoE++ to 2-Port 802.3at Gigabit PoE Extender
- Physical Port
- Three 10/100/1000BASE-T Gigabit RJ45 ports
- 1-port data + power input
- 2-port data + power output
- Power over Ethernet
- Complies with IEEE 802.3bt PoE++ Type 4 standard PD
- Compatible with PoH (Power over HDBASE-T) protocol
- Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD
- Supports PoE input power up to 95 watts
- Complies with IEEE 802.3at Power over Ethernet mid-span PSE
- Up to 2 IEEE 802.3af/802.3at PoE devices powered
- Supports total PoE budget up to 65 watts for 2 PoE output ports
- Auto detects powered device (PD)
- Extends the range of PoE to an additional 100 meters (328ft.)
- Forwards both Ethernet data and PoE power to remote device
- Layer 2 Features
- Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- Integrates address look-up engine, supporting 2K absolute MAC addresses
- 9K jumbo frame support in 1000Mbps duplex mode
- Automatic address learning and address aging
- Industrial Case and Installation
- IP67-rated aluminum case
- Wall-mount design
- Supports 6KV DC Ethernet ESD protection
- 40 to 75 degrees C operating temperature
- No external power cable required for installation
- Plug and Play installation
SKU | IPOE-E302 |
---|---|
EAN | 4711605284929 |
Manufacturer | Planet |
Availability | In Stock |
Outdoor 802.3bt PoE++ Solution for Breaking RJ45 100m Limitation PLANET IPOE-E302 is an industrial IP67-rated 1-port 802.3bt PoE++ to 2-port 802.3bt/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The IPOE-E302 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ or PoH (Power over HDBASE-T) input port and supplies a maximum of 65-watt PoE power budget for 2 PoE output ports, extending both the Gigabit Ethernet Data and 802.3at Power over Ethernet over the UTP cable. The IPOE-E302 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter. Weather-proof RJ45 Ethernet Connector and Shielded Plug The IPOE-E302 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E302 is equipped with 3-port 10/100/1000BASE-T auto-negotiation RJ45 connectors and 3 waterproof cable glands for direct-attach applications. Assembled with waterproof cable gland, it can make the general RJ45 connector weather-proof and provides tight and strong connection, and ensures it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold. Environmentally-hardened Design With industrial-level IP67-rated aluminum case, the IPOE-E302 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment. Plug and Play, and Easy Cabling Installation The IPOE-E302 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The IPOE-E302 is designed in a compact box containing three RJ45 ports, of which one "PoE+ In" port functions as PD input and the other two "PoE++ Out" ports on the other side function as PSE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously to a remote PD without affecting the data transmission performance. It offers a cost-effective and quick solution to double the standard range of PoE from 100 to 200 meters.
Performance | |
---|---|
Jumbo frames support | Yes |
MAC address table | 2000 entries |
Flow control support | Yes |
Duplex system | Full, Half |
International Protection (IP) code | IP67 |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Type | Network transmitter |
Power over Ethernet (PoE) | Yes |
Auto-negotiation | Yes |
Technical details | |
Jumbo frames support | Yes |
MAC address table | 2000 entries |
Flow control support | Yes |
Duplex system | Full, Half |
International Protection (IP) code | IP67 |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
LED indicators | Activity, Link |
Type | Network transmitter |
Power over Ethernet (PoE) | Yes |
Auto-negotiation | Yes |
Harmonized System (HS) code | 85176990 |
Network | |
Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x |
Ports & interfaces | |
Ethernet LAN (RJ-45) ports | 3 |
Design | |
LED indicators | Activity, Link |
Certification | FCC 15 A, CE IEC 60068-2-32, IEC 60068-2-27, IEC 60068-2-6 |
Product colour | Black, Grey |
Power | |
---|---|
Power consumption (max) | 97 W |
Power over Ethernet (PoE) | Yes |
Total Power over Ethernet (PoE) budget | 65 W |
Operational conditions | |
Operating temperature (T-T) | -40 - 75 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 95% |
Storage relative humidity (H-H) | 5 - 95% |
Weight & dimensions | |
Width | 150 mm |
Depth | 43.8 mm |
Height | 72.9 mm |
Weight | 339 g |
Colour | |
Product colour | Black, Grey |
Certificates | |
Certification | FCC 15 A, CE IEC 60068-2-32, IEC 60068-2-27, IEC 60068-2-6 |
You may also be interested in
Product |
![]() Recommended
PLANET IPOE-E302 network extender Netw...
£149.40
£124.50
|
![]()
£129.80
£108.17
|
![]() Hot Product
StarTech.com 1 Port USB over Cat5 / Ca...
£142.94
£119.12
|
![]() Bestseller
StarTech.com 4-Port Gigabit Midspan -...
£179.48
£149.57
|
![]() Popular
StarTech.com 1-Port Gigabit PoE+ Exten...
£139.61
£116.34
|
![]() New
PLANET LRP-101CE network extender Netw...
£163.80
£136.50
|
---|---|---|---|---|---|---|
SKU |
IPOE-E302
|
VOR-ORL
|
USB110EXT2
|
POEINJ4G
|
POEEXT1GAT
|
LRP-101CE
|
Description |
Outdoor 802.3bt PoE++ Solution for Breaking RJ45 100m Limitation PLANET IPOE-E302 is an industrial IP67-rated 1-port 802.3bt PoE++ to 2-port 802.3bt/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The IPOE-E302 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ or PoH (Power over HDBASE-T) input port and supplies a maximum of 65-watt PoE power budget for 2 PoE output ports, extending both the Gigabit Ethernet Data and 802.3at Power over Ethernet over the UTP cable. The IPOE-E302 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter. Weather-proof RJ45 Ethernet Connector and Shielded Plug The IPOE-E302 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E302 is equipped with 3-port 10/100/1000BASE-T auto-negotiation RJ45 connectors and 3 waterproof cable glands for direct-attach applications. Assembled with waterproof cable gland, it can make the general RJ45 connector weather-proof and provides tight and strong connection, and ensures it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold. Environmentally-hardened Design With industrial-level IP67-rated aluminum case, the IPOE-E302 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment. Plug and Play, and Easy Cabling Installation The IPOE-E302 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The IPOE-E302 is designed in a compact box containing three RJ45 ports, of which one "PoE+ In" port functions as PD input and the other two "PoE++ Out" ports on the other side function as PSE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously to a remote PD without affecting the data transmission performance. It offers a cost-effective and quick solution to double the standard range of PoE from 100 to 200 meters.
|
Ethernet Extender for non-POE connections
OUTREACH Lite provides a simple way to double the length of a 10/100 Ethernet connection. No configuration is required, it does not require a local power supply, and it does not restrict the throughput of the network link at all. Compact and wall-mountable, OUTREACH Lite takes its power from the network cable using the universal 802.3af Power over Ethernet (POE) standard. Network connections can easily be upgraded to POE compatibility if it is not already available using a simple injector. Note: OUTREACH Lite is powered by POE but does not forward it to other equipment. To extend network connections to devices that need POE or POE Plus, see Veracity's OUTREACH Max POE-forwarding Ethernet extender. Rapid installation Extending network cable runs from an existing POE switch port is as simple as connecting OUTREACH Lite in-line with the cable. Cable runs of up to 200 metres (656 feet) in length are possible, by using a single OUTREACH Lite to connect two individual sections of up to 100 metres (328 feet) each. Veracity's OUTREACH Lite Ethernet extender requires no external power supply. It simply has two network ports which configure automatically on connection for network speed, duplex and crossover. If no POE is available on the network, Veracity's OUTSOURCE injector can easily be added at either end of the connection. No other equipment is required by end devices, as all Cat5/Cat6 links are regular Ethernet connections. Full-bandwidth Ethernet extender Because OUTREACH Lite repeats the Ethernet signal before it can degrade, the network can be extended without any restriction on its data capacity. Thus the 200Mbit/s bandwidth of regular full-duplex 100BASE-T Ethernet is maintained, for maximum reliability and predictability of operation. Go further OUTREACH Lite can be used in combination with Veracity's OUTREACH Max POE-forwarding Ethernet extender, to create connections of 300 metres, 400 metres or even further. For example, to extend a 100BASE-T connection to 400 metres (1312 feet) without any bandwidth restriction, two OUTREACH Max units would be located at 100 metre intervals, followed by an OUTREACH Lite. POE from the switch or injector would be forwarded by the OUTREACH Maxes as far as the OUTREACH Lite, so no power connections would be required along the connection. This technique can be used to create unrestricted Cat5 network connections of greater than 2km (1.25 miles) in length if required. See Veracity's "Long Range Ethernet Extension" application note for more information. |
Extend a USB 1.1 device up to 40m (131ft) away from a computer, over a Cat5/Cat6 cable
The USB110EXT2 USB 1.1 Extender enables you to extend a USB 1.1 connection over distances of up to 40-meters (131-feet) using standard Cat5 or Cat6 UTP cabling, bypassing the normal limitation of 5m (15ft) for USB 1.1 devices and allows for the host computer system to be safely stored in a remote location. The USB Extender features a compact design with no external power requirements, making it the ideal solution for remote USB cameras, keyboards, mice or other input devices for environments where install space or access to electrical outlets is limited. Able to deliver up to 300mA of power (when supplied with 500mA from the host computer), the extender is fully compliant with the USB 1.1 specification, with support for up to 12Mbps of data bandwidth. Backed by a StarTech.com 3-year warranty and free lifetime technical support. The StarTech.com Advantage - USB 1.1 extender supports any full-speed (12 Mbps) or low-speed (1.5 Mbps) USB peripheral at up to 131 feet (40 meters) - a cost-effective solution for extending USB devices that don't require the higher bandwidth offered by USB 2.0+ - Provides more power at the remote end (up to 300mA), without external power, than most other similar USB Ethernet extenders, for more versatile device connection options - USB over Cat5/Cat6 eliminates the need to cascade expensive, inflexible and space consuming USB hubs or repeaters for extending the range of a USB device |
This Gigabit midspan PoE+ injector is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.
It supplies up to 30 Watts output to each port, so you can easily power and access up to four high-power PoE-compliant devices — such as IP cameras — using standard Ethernet cable. More power, with less cost and hassle This versatile midspan PoE+ injector is suited for almost all PoE device classes, including wireless access points, as well as IP phones and cameras. The high-power PoE+ injector offers 120W total power distribution and delivers full power — up to 30.8W — from each port. Now, you can easily scale and power your PoE+ devices across long distances, even in remote locations where a typical power outlet is unavailable. Plus, the cost-effective Power over Ethernet+ injector lets you connect your PoE-powered devices (PDs) to a non-PoE-capable switch, avoiding the expense and aggravation of upgrading your existing switch to a PoE-enabled model. Easy to set up in mixed environments This injector is the perfect solution for a variety of environments. It features a wall-mountable rugged metal casing, but is palm-sized making it perfect for desktop placement too. With plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow. Convenient, protected connections Not sure which class your PoE devices are? The Gigabit midspan PoE+ injector automatically detects the power requirements of your PoE PDs, and delivers the appropriate level of power without damaging your devices. With integrated circuit protection between each port, your devices are also protected from power interference. The POEINJ4G is backed by a StarTech.com 2-year warranty and free lifetime technical support. |
This Gigabit PoE+ extender spans your Power over Ethernet (PoE) device over longer distances, letting you double the 100m limitations of a traditional PoE infrastructure.
Now you can connect your Gigabit PoE device up to a maximum of 200m away, so it’s easy to install a remote IP camera or access point. Plus the extender can be daisy-chained for more scalability. Unrestricted PoE+ range and convenience Need more distance? This convenient PoE+ repeater maximizes range and flexibility by extending your PoE connection by an extra 100m (330ft), while providing 24-watt power output to compatible devices. Simply connect the extender to your power sourcing equipment (PSE) and your PoE-powered device (PD) and you’re all set. The extender is compliant with the 802.3at/af standard, so it will work with existing PSE, such as a StarTech.com PoE+ injector (POEINJ1G) or PoE+ switch (IES81000POE). Daisy chain for longer distance and flexibility Still need more distance? If an extra 100m isn’t enough, this full-featured PoE extender offers daisy chain capability. You can easily connect four extenders together, letting you install your PoE+ PD up to 500m (1640ft) away. It’s perfect for business, education, and retail environments (output wattage is dependent on the number of daisy-chained extenders used). Convenient installation options and durable construction Get up and running quickly. This Gigabit PoE+ extender can be positioned right where you need it, with a wall-mountable design that requires no external power adapter. You can enjoy reliable performance with little worry of downtime or failure, the extender features a rugged metal housing with built-in ESD and surge protection. The POEEXT1GAT is backed by a StarTech.com 2-year warranty and free lifetime technical support. |
PLANET Technology Long Reach PoE Solution enables all enterprises and network service providers to set up an IP infrastructure in a remote location where 802.3af/at PoE compliant powered devices can receive both data and power via PLANET switches, and PLANET LRP extenders and injectors over a long distance but not limited to the normal 100 meters.
Data and Power Transmitted over Long Distance PLANET LRP-101CE, a PLANET Long Reach PoE solution, is a single-port 802.3at PoE+ Extender that is installed at a remote location connecting to an PoE IP camera or PoE wireless AP. The LRP-101CE has to work with PLANET single-port Long Reach PoE Injector or Multiple-channel Long Reach PoE Switch to be able to simultaneously transmit both data and power to a PD over a distance of up to 1,000m (3,280ft) over coaxial cable. The LRP-101CE provides a maximum of 25-watt power output over Ethernet cable to a remote PoE IP camera, PoE wireless AP or access control systems complied with 802.3af/at PoE. Daisy-chaining Multiple Nodes PLANET Long Reach PoE solution can easily build a power system for centrally-controlled IP cameras in a high availability network infrastructure. It gives users the flexibility to expand small area network with BNC T-connector for sharing four nodes per port when needed. IP Ethernet and Power over Long Existing Coaxial Cable A normal UTP cable can only be extended up to 100 meters, but the LRP-101CE, when working with the LRP Injector or LRP Switch, can extend PoE networking up to 1,000 meters (3,280ft) over 75 ohm coaxial cable with stable, high-quality video transmission. It eliminates the need for an additional electrical outlet as its single power source can provide power to a PoE PD at long range via the LRP-101CE. Stable Operating Performance under Difficult Environments PLANET Long Reach PoE Extender is the perfect solution for extended data and power transmission for warehouses, parking lots, campuses, casinos, and many more. It can operate stably under temperature range from -20 to 70 degrees C which enables the users to conveniently apply the device in any harsh environment. Without the problem of power source, it makes the installation of remote PoE powered devices easier and more efficiently. Plug-n-play Installation With the plug and play feature, the LRP-101CE can be used immediately without the need of configuration and is also compliant with all kinds of IP network protocols. If there is a network disconnection, it can be re-connected in less than 5 seconds. Moreover, the rich diagnostic LEDs on the front panel show the operating status of the individual port and the whole system, enabling the administrator to efficiently manage the network. |
Short Description |
Industrial 1-Port 802.3bt PoE++ to 2-Port 802.3at Gigabit PoE Extender
|
Ethernet Extender, 200-2200m outsource, 1.3W, Blue
|
1 Port USB over Cat5 / Cat6 Ethernet Extender - up to 131ft (40m)
|
StarTech.com 4 Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af - Wall-mountable Power over Ethernet Midspan
|
StarTech.com 1 Port Gigabit PoE+ Extender 802.3at & 802.3af - 100m (330ft) - Power over Ethernet Extender - PoE Repeater Network Extender
|
1-Port Long Reach PoE over Coaxial Extender
|
Manufacturer |
Planet
|
Veracity
|
StarTech.com
|
StarTech.com
|
StarTech.com
|
Planet
|