Citizen SERIAL INTERFACE CARD interface cards/adapter

35BAYCF2IDE

PEX1TO162

89294

USB3SPLATE

SAT2MSAT25

Connect a CF card to a computer through an IDE connector
This Compact Flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive. The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection. Designed and constructed to provide a reliable media card platform, the CF IDE adapter is backed by StarTech.com''s 2-year warranty.
The StarTech.com Advantage
- Quick and driver free installation into any IDE 40 pin and 44 pin slot
- Easily swap cards in and out with built-in push button ejector

Connect a low profile x16 PCI Express Card to an x1 slot

This PCIe x1 to PCIe x16 Slot Extension adapter provides enhanced compatibility between motherboards and a variety of PCI Express expansion cards, allowing you to install a PCIe card (x1 - x16) in an x1 slot.

The PCI Express x1 to x16 adapter accommodates low profile x2, x4, x8, x12 or x16 PCI Express cards, eliminating the cost and hassle of upgrading a PCIe card or replacing the motherboard for the sake of compatibility.

The StarTech.com Advantage

- Turns a low profile PCIe card into a full profile card to fit in workstations or servers
- Backed by a StarTech.com lifetime warranty and free lifetime technical support

The Delock PCI Express card by Delock enables you to use a Mini PCI Express card in a PCI Express slot. Due to its three pre-punched RP-SMA sockets the card is most suitable for radio modules.

The USB3SPLATE 2-Port USB 3.0 A Slot Plate converts the USB pins on the USB 3.0 motherboard header to 2 standard USB 3.0 A-type ports. The plate can be mounted on the rear panel of a computer case, adding two USB 3.0 A female ports for simple connection to USB peripheral devices.

The USB 3.0 standard supports transfer rates of up to 5Gbps, and provides connectivity and support for older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices.

The StarTech.com Advantage
Adds two USB 3.0 ports for faster transfer rates with USB 3.0 devices, while still supporting USB 2.0 and USB 1.1 devices
Easy to use and install
Backed by StarTech.com lifetime warranty

Convert an mSATA mini-SSD into a Standard 2.5in SATA SSD

The SAT2MSAT25 2.5in SATA to Mini SATA SSD Adapter Enclosure turns an mSATA (Mini SATA) mini-SSD into a standard 2.5in SATA SSD for use anywhere a 2.5in SATA drive can be used.

To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller.

Featuring all of the standard mounting points that a normal 2.5in hard drive uses, the converter can be installed into External Hard Drive Enclosures, Hard Drive Docking Stations or into desktop or laptop computers. The enclosure also features a unique design that enables seamless data pass-through with no conversion bottlenecks, enabling the mSATA drive to work as fast as it's allowed by the host system/interface.

The StarTech.com Advantage

- Maximize performance, with file transfer speeds up to 6Gbps when paired with SATA III HDD and controller
- Fits virtually any full-length mSATA Solid State Drive into an housing that is identical to a standard 2.5in SATA drive
- A completely pass-through design allows for the mSATA drive to operate at full capacity without any conversion bottleneck

3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader

StarTech.com PCI Express X1 to X16 Low Profile Slot Extension Adapter - PCIe x1 to x16 Adapter

Mini PCI Express + 3 RP-SMA Ports

StarTech.com 2 Port USB 3.0 A Female Slot Plate Adapter

StarTech.com 2.5in SATA to Mini SATA SSD Adapter Enclosure - Mini PCIe ssd Adapter - SATA to mSATA - Mini PCIe SATA

StarTech.com

StarTech.com

DeLOCK

StarTech.com

StarTech.com