My Cart
You have no items in your shopping cart.
Creating an account has many benefits:
Power over ethernet | No |
---|---|
Stackable | Yes |
Ports type | Gigabit Ethernet (10/100/1000) |
Ports quantity | 24 |
SKU | JL806A |
EAN | 0190017520346 |
Manufacturer | HPE |
Availability | In Stock |
Product Family | Aruba Networking |
Management features | |
---|---|
Switch type | Managed |
Web-based management | Yes |
System event log | Yes |
Quality of Service (QoS) support | Yes |
Multicast support | Yes |
Switch layer | L2+ |
Cloud-managed | Yes |
Ports & interfaces | |
SFP+ module slots quantity | 2 |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Installed SFP modules quantity | 0 |
Installed SFP+ modules quantity | 0 |
10G Ethernet (copper) ports quantity | 2 |
Network | |
Auto-sensing | Yes |
Networking standards | IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3z |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Port mirroring | Yes |
Link aggregation | Yes |
Flow control support | Yes |
Auto MDI/MDI-X | Yes |
10G support | Yes |
IGMP snooping | Yes |
IPv6 FIB entries | 32 |
IPv4 FIB entries | 32 |
Data transmission | |
Jumbo frames | 9216 |
Throughput | 95 Mpps |
Latency (10-100 Mbps) | 4.4 µs |
Latency (1 Gbps) | 2.2 µs |
Latency (10 Gbps) | 1.1 µs |
Packet buffer memory | 1.5 MB |
MAC address table | 16000 entries |
Switching capacity | 128 Gbit/s |
Jumbo frames support | Yes |
Security | |
Authentication | Port-based authentication |
IGMP snooping | Yes |
Access Control List (ACL) | Yes |
Authentication type | RADIUS |
DHCP features | DHCP snooping |
Multicast features | |
Multicast support | Yes |
Protocols | |
IPv6 FIB entries | 32 |
IPv4 FIB entries | 32 |
IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
Design | |
Form factor | 1U |
Product colour | White |
Stackable | Yes |
Rack mounting | Yes |
Performance | |
Physical stacking (units) | 4 |
Processor frequency | 800 MHz |
Memory type | DDR3-SDRAM |
Internal memory | 1000 MB |
Flash memory | 512 MB |
Built-in processor | Yes |
Processor model | ARM Cortex-A9 |
Packet buffer memory | 1.5 MB |
Stackable | Yes |
Harmonized System (HS) code | 85176990 |
Power | |
---|---|
Power supply included | Yes |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | No |
Operational conditions | |
Storage temperature (T-T) | -40 - 70 °C |
Storage relative humidity (H-H) | 15 - 90% |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 15 - 95% |
Operating altitude | 0 - 3000 m |
Virtual LAN features | |
VLAN support | Yes |
Weight & dimensions | |
Width | 350.5 mm |
Depth | 442.5 mm |
Height | 44 mm |
Weight | 3.9 kg |
IPv4 & IPv6 features | |
IPv6 FIB entries | 32 |
IPv4 FIB entries | 32 |
IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
Technical details | |
Physical stacking (units) | 4 |
Form factor | 1U |
Product colour | White |
Stackable | Yes |
Processor frequency | 800 MHz |
Rack mounting | Yes |
Built-in processor | Yes |
Memory | |
Packet buffer memory | 1.5 MB |
Memory type | DDR3-SDRAM |
Internal memory | 1000 MB |
Flash memory | 512 MB |
Logistics data | |
Harmonized System (HS) code | 85176990 |
Product |
![]()
£435.01
£362.51
|
![]() Bestseller
TP-Link TL-SG1048 network switch Unman...
£294.91
£245.76
|
![]() Popular
D-Link 48-Port Gigabit Smart Managed S...
£351.71
£293.09
|
![]() Recommended
Ubiquiti Networks ES-24-250W network s...
£351.72
£293.10
|
![]() Hot Product
D-Link 52-Port PoE Gigabit Smart Manag...
£409.07
£340.89
|
![]() New
Juniper EX3400 48PORT SWITCH Managed L...
£644.36
£536.97
|
---|---|---|---|---|---|---|
SKU |
JL806A
|
TL-SG1048
|
DGS-1210-48
|
ES-24-250W
|
DGS-1210-52MP
|
EX3400-48P
|
Description |
Aruba Instant On 1960 Switches are advanced, smart-managed, fixed configuration Gigabit stackable switches designed for small and growing businesses that are easy to deploy and affordable. These switches are designed to scale as business grows, making adding more employees, devices and applications simple. Aruba Instant On 1960 switches are made to handle today’s bandwidth-heavy applications like voice and video conferencing, enabling consistent connectivity to improve user experience and application performance. These switches come with flexible management option: local web GUI or Instant On mobile app and cloud-based web portal.
Features High-level Gigabit with 10GbE Networking for Advanced Small Businesses - Each model of the Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. - Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters. - With PoE models, up to 30W PoE power delivery is available for Class 4 PoE devices like access points, surveillance cameras and VoIP phones, and up to 60W PoE power delivery is available for Class 6 PoE devices like pan-tilt zoom cameras and video-enabled IP-phones. Simplify Network Deployment and Management for Small Organizations - The Aruba Instant On 1960 Switch series offers a complete portfolio of choices for increased small business flexibility. It consists of five models including two (2) 24-port and two (2) 48-port models in PoE and non-PoE configurations, and a 12 port 10-Gigabit aggregation switch. - The 24-port and 48-port PoE models come with a power budget of 370W and 600W respectively to support the latest PoE-powered IoT devices. - The Aruba Instant On 1960 Switch series can be deployed using two management modes – Instant On cloud-management (access via mobile app and/or web portal) and the local web GUI. - Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. - The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. Ease of Use with Cloud-Managed Stacking - The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four (4) Aruba Instant On 1960 switches and manage as a single entity. - The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. - Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. Robust Security to Protect Your Network - The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. - Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. - Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks. |
What This Product Does
The 48-Port Gigabit Switch TL-SG1048 is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements. A reliable, easy-to-use switch without the complexity of management, the TL-SG1048 provides 48 10/100/1000Mbps ports. The TL-SG1048 combines ease of use with unsurpassed performance resulting in an exceptional value for any cost-conscious network administrator who wants the best possible solution at the best possible price. TP-Link Green Technology This new generation 48-Port Gigabit Rackmount Switch TL-SG1048 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, most of the packaging material can be recycled. Ease of Use The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Compact size shell make it ideal for desktops with limited space while it is also Rackmountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis. High Performance The TL-SG1048 features non-blocking wire-speed architecture with a 96Gbps switching capacity for maximum data throughput. An 8K MAC address table provides scalability for even the largest networks. It also supports 802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission. |
With increased PoE output and advanced Layer 2 management and security features, D‑Link’s DGS‑1210 Smart Managed Gigabit Switches provide a cost‑efficient and flexible solution for expanding any business network.
Advanced Layer 2 Management The DGS-1210 Smart family features advanced network management accessible via the Web-based UI that equip your business with network capabilities such as VLANs, Spanning Tree Protocol (STP), link aggregation, and dual configuration files. With powerful security features including IGMP snooping, access control lists, and port security the DGS-1210 Smart family is a versatile solution for access-edge network environments. Fibre Uplinks Use fibre uplinks to connect across longer distances, like factory lines and university campuses, using lightweight, secure, and energy-efficient fibre optic cabling that’s immune to interference and which has access to higher throughput to protect the future demands of your business network. PoE and PoE+, with budgets up to 193W The DGS-1210 Smart Series includes a range of PoE-enabled switches for businesses looking to power VoIP phones, wireless access points or network cameras. Free Network Design and Management Software D-Link’s free Network Assistant (DNA) displays all connected devices and speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Optional upgrade licenses allow you to broaden your network and analysis. Smart Energy-Saving Design D-Link Green technology enables the DGS-1210 Smart series to save power without any sacrifices. The majority of the family utilises a fanless design, helping reduce energy usage. Surveillance Mode Select Surveillance Mode in the Web UI to take advantage of easy-to-use surveillance features which also enable you to manage your surveillance network effortlessly. It automatically detects your security devices and segments them into a dedicated Auto Surveillance VLAN to handle video surveillance traffic securely and efficiently. |
- Non-Blocking Throughput Switching Performance - Gigabit Ethernet RJ45 and SFP+/SFP Ports - Auto-Sensing IEEE 802.3af/at PoE Advanced Switching Technology for the Masses Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Switching Performance The EdgeSwitch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the 24-port models support up to 26 Gbps, while the 48-port models support up to 70 Gbps. PoE+ Flexibility The EdgeSwitch models are available with 24 or 48 PoE Gigabit Ethernet ports of auto-sensing IEEE 802.3af/at or configurable 24V Passive PoE to simplify your infrastructure. By default, the EdgeSwitch automatically detects 802.3af/at devices so they automatically receive PoE. For 24V Passive PoE devices, manually enable 24V passive PoE using the EdgeSwitch Configuration Interface. Fiber Connectivity The EdgeSwitch provides fiber connectivity options for your growing networks. The 24-port models include two SFP ports, providing up to 1 Gbps uplinks. For high-capacity uplinks, the 48-port models include two SFP and two SFP+ ports, providing up to 10 Gbps uplinks. Comprehensive User Interface Designed for convenient management, the EdgeSwitch Configuration Interface allows administrators to configure and monitor switch features in a graphical user interface. For advanced users, an industry-standard command-line interface (CLI) is available through telnet and SSH. Powerful Functionality The EdgeSwitch uses a sophisticated operating system that provides basic switching features, PoE configuration per port, and a variety of advanced features including: - MSTP/RSTP/STP - VLAN, Private VLAN, Voice VLAN - Link Aggregation - DHCP Snooping, IGMP Snooping - TACACS+, RADIUS, 802.1X, MAC Filtering, ACL - DiffServ, CoS - Static Routing, Policy-Based Routing
|
Smart Managed with a Plus
With increased PoE output, advanced Layer 2 management features, and Layer 3 static routing , D-Link’s DGS-1210 Smart+ Managed Gigabit Switches provide a cost-efficient and flexible solution for expanding any business network. Advanced Layer 2 Management with Layer 3 Static Routing The DGS-1210 Smart+ family has advanced network management options, accessible via Compact CLI or the Web-based UI, that equip your business with network capabilities such as VLANs, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routing, dual software images, and dual configuration files. With powerful security features like IGMP snooping, access control lists, port security, and the unique D-Link Safeguard Engine that protects your network against malicious denial-of-service attacks from broadcast, multicast and unicast flooding, the DGS-1210 Smart+ family is a versatile solution for access-edge network environments. Fibre Uplinks Use fibre uplinks to connect across longer distances, like factory lines and university campuses, using lightweight, secure, and energy-efficient fibre optic cabling that’s immune to interference and which has access to higher throughput to protect the future demands of your business network. PoE and PoE+, with budgets up to 370W The DGS-1210 Smart+ Series includes a range of high power budget PoE-enabled switches for businesses looking to power larger deployments of VoIP phones, wireless access points or network cameras. This product is compatible with Nuclias Connect Nuclias Connect is our free remote network management software designed with network scalability, privacy and customisation in mind. It can be used either as an on-premises software management platform, or as a cloud solution. Free Network Design and Management Software D-Link’s free Network Assistant (DNA) displays all connected devices and speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Optional upgrade licenses allow you to broaden your network and analysis. Smart Energy-Saving Design D-Link Green technology enables the DGS-1210 Smart+ series to save power without any sacrifices. The majority of the family utilises a fanless design, otherwise they feature a smart fan that powers on above a certain temperature. All come with advanced silicon technology which saves up to 73% of energy compared to a normal switch. Surveillance Mode Select Surveillance Mode in the Web UI to take advantage of easy-to-use surveillance features which enable you to manage your surveillance network effortlessly. It automatically detects your security devices and segments them into a dedicated Auto Surveillance VLAN to handle video surveillance traffic securely and efficiently. |
EX3400 Ethernet Switches are a cost-effective solution for today’s most demanding converged data, voice, and video enterprise access networks. The compact, fixed-configuration 1U devices offer levels of performance and management previously available only with high-end access switches.
Featuring models offering either 24 or 48 10/100/1000BASE-T ports, the EX3400 switches also support IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering networked telephones, video cameras, wireless LAN access points, and other IP devices. Four front-panel dual-mode (GbE/10GbE) SFP/SFP+ uplink ports and two 40GbE QSFP+ ports are also available for connecting the switches to upstream devices. The EX3400 supports Juniper’s unique Virtual Chassis technology for interconnecting up to 10 switches that can be managed as a single device. The EX3400 can also be configured as a satellite device in a Junos Fusion Enterprise deployment, which aggregates large numbers of access switches into a logical management platform. |
Short Description |
Aruba Instant On 1960 24G 2XGT 2SFP+ Switch
|
48-port Unmanaged Gigabit Rackmount Switch
|
48 x 10/100/1000BASE-T, 4 x 100/1000 Mbps GbE/SFP, DDR3 128 MB, 32 MB Flash, 440 x 210 x 44 mm
|
Managed PoE+ Gigabit Switches with SFP, 26 Gbps, 24 Gigabit RJ45, 2 SFP, 250W
|
48 x 10/100/1000BASE-T PoE, 4 x 100/1000 Mbps GbE/SFP, 256 MB DDR3, 32 MB Flash, 440 x 430 x 44 mm
|
336 Gbps, 250 Mpps, 1 GHz, 2 GB, 48x 10/100/ 1000BASE-T, PoE+, 4x SFP+, 2x QSFP+, 442 x 44 x 350 mm
|
Manufacturer |
HPE
|
TP-LINK
|
D-Link
|
Ubiquiti
|
D-Link
|
Juniper
|
New customer? Start Here.